4-Inch Single-Wall Stove Pipe - 1-Foot Length

This 4-inch single-wall stove pipe is a 12-inch connector section for compatible stove installations that use a 4-inch flue collar. The short length is useful when you need to fine-tune the connector run between the appliance and the point where the installation transitions to the listed insulated chimney system.

The pipe is made from 26-gauge black-finished stainless steel with seamless welded construction rather than snap-together pipe.

1-Foot 4-Inch Single-Wall Pipe Features

• Diameter: 4 inches
• Length: 1 foot / 12 inches
• Material: 26-gauge black-finished stainless steel
• Construction: Seamless welded pipe
• Type: Single-wall connector stovepipe
• Use: Short straight connector run where single-wall pipe is permitted

When a 1-Foot Section Makes Sense

The 12-inch length gives you more control over the connector layout when a longer 2-foot or 3-foot section would place the chimney transition too high or create an unnecessary joint. It can also be combined with longer sections when the appliance manual and connector-pipe requirements allow that arrangement.

Choose the Length That Fits Your Layout

• 4-Inch Single-Wall Stove Pipe - 1-Foot Length
• 4-Inch Single-Wall Stove Pipe - 2-Foot Length
• 4-Inch Single-Wall Stove Pipe - 3-Foot Length

Single-Wall Connector Pipe vs. Insulated Chimney

Single-wall stovepipe is connector pipe. It is not a substitute for insulated Class A chimney where the venting system passes through ceilings, walls, roofs, attics, or similar construction.

At the required transition point, use the correct 4-Inch HT Pipe Adapter to connect to the compatible Selkirk insulated chimney system.

Our 4-Inch Stove Pipe Guide explains the difference between connector stovepipe and insulated chimney pipe in more detail.

Complete the 4-Inch Chimney System

For the insulated portion of the installation, see our 36-inch insulated chimney pipe, 24-inch insulated chimney pipe, and 4-inch rain cap.

You can also browse all 4-inch chimney and installation accessories.

Compatibility and Safety

This pipe is intended for compatible appliances with a 4-inch flue connection when single-wall connector pipe is allowed by the appliance manual and installation requirements. The Caboose Tiny Wood Stove uses a 4-inch chimney connection, but the complete installation must still follow the current Caboose manual.

For any other stove, verify the required flue size, connector type, clearances, chimney listing, and installation instructions before ordering. A 4-inch collar alone does not guarantee that every 4-inch venting configuration is approved for that appliance.

For general heating and chimney safety information, see the U.S. Fire Administration heating fire-safety guidance.

If you are unsure which single-wall length or transition components your installation needs, contact us before ordering.