4-Inch Single-Wall Stove Pipe - 2-Foot Length

This 4-inch single-wall stove pipe is a 2-foot connector section for compatible stove installations that use a 4-inch flue collar. The 24-inch length is a useful middle option when a 3-foot section is too long but a 1-foot section would require extra joints.

The pipe is made from 26-gauge black-finished stainless steel with seamless welded construction rather than snap-together pipe.

2-Foot 4-Inch Single-Wall Pipe Features

• Diameter: 4 inches
• Length: 2 feet / 24 inches
• Material: 26-gauge black-finished stainless steel
• Construction: Seamless welded pipe
• Type: Single-wall connector stovepipe
• Use: Interior connector run where single-wall pipe is permitted

Where a 2-Foot Connector Section Fits Best

The 24-inch length works well for shorter stove-to-chimney transitions and for layouts where you want to minimize the number of connector joints. It can also be combined with our 1-foot or 3-foot sections when the installation requires a different total connector length.

Choose the shortest practical connector route that still follows the appliance manual, connector-pipe requirements, and chimney-system instructions.

Choose From Multiple 4-Inch Single-Wall Lengths

• 4-Inch Single-Wall Stove Pipe - 1-Foot Length
• 4-Inch Single-Wall Stove Pipe - 2-Foot Length
• 4-Inch Single-Wall Stove Pipe - 3-Foot Length

Know Where Single-Wall Pipe Ends

Single-wall connector pipe is not the same as insulated chimney pipe. Connector pipe is used between the stove and the listed chimney system only where that arrangement is allowed. It should not be used as a substitute for insulated chimney at building penetrations such as ceilings, walls, roofs, or attics.

When the installation reaches the required transition point, use the correct 4-Inch HT Pipe Adapter to connect to the compatible insulated chimney system.

Our 4-Inch Stove Pipe Guide explains the difference between connector stovepipe and insulated chimney pipe in more detail.

Complete the Chimney System

For the insulated portion of the installation, see our 36-inch insulated chimney pipe, 24-inch insulated chimney pipe, and 4-inch rain cap.

You can also browse all 4-inch chimney and installation accessories for support, flashing, firestop, and termination components.

Compatibility and Safety

This pipe is intended for compatible appliances with a 4-inch flue connection when single-wall connector pipe is allowed by the appliance manual and installation requirements. The Caboose Tiny Wood Stove uses a 4-inch chimney connection, but the complete installation must still follow the current Caboose manual.

For any other stove, verify the required flue size, connector type, clearances, chimney listing, and installation instructions before ordering. Do not assume that every appliance with a 4-inch collar uses the same venting configuration.

For general wood-stove and heating safety information, see the U.S. Fire Administration heating fire-safety guidance.

If you are unsure which single-wall length or transition components your installation needs, contact us before ordering.